SALE ALLPOWERS 200 Watt Waterproof IP68 Flexible Solar Panel SF200
SKU: SF200
Details
Not every solar installation needs rigid glass panels and permanent racking hardware. For RV owners, van lifers, boat builders, and off-grid DIYers who need reliable solar charging on curved or unconventional surfaces, the ALLPOWERS SF200 200W Flexible Solar Panel is purpose-built for exactly that use case. At just 3mm thick and 4.1kg (9.03 lbs), the SF200 is thinner than a smartphone and light enough to mount on fiberglass RV roofs, boat decks, curved van tops, and popup camper surfaces without adding structural stress or requiring heavy mounting brackets. It can bend into a full "U" shape, conforming to surfaces that would make rigid panels impossible to install — and that kind of installation flexibility is what separates a panel that integrates cleanly into a build from one that forces compromises.
The monocrystalline silicon cells with ETFE lamination deliver 22–25% maximum conversion efficiency — significantly better than older polycrystalline designs and competitive with rigid panels costing considerably more. In clear, direct sunlight, expect real-world output in the 140–160W range on a 200W-rated flexible panel of this class, which is normal and expected: manufacturer ratings reflect STC (Standard Test Conditions) in lab settings, not an actual rooftop in July. That 140–160W of continuous solar input, sustained over a 5–6 hour peak sun window, delivers 700–960Wh of energy per day — enough to keep an R600 or S700 topped off through daily use, meaningfully extend a larger station like the R1500 or R2500 during moderate daytime loads, or supplement a house battery bank on a camper van build. The SF200's maximum output voltage of 32V (Vmp) and open-circuit voltage of 38.4V (Voc) place it within the MPPT input window of virtually every portable power station and solar charge controller on the market.
What makes the SF200 particularly well-suited for permanent and semi-permanent installations is the combination of its IP68 waterproof rating and honeycomb ETFE surface construction. IP68 is the highest waterproof rating in consumer solar panels — it means the panel is fully protected against sustained water immersion, not just rain splashes. The ETFE surface provides anti-reflective light refraction that captures energy from wider sun angles throughout the day, while also resisting UV degradation, salt spray, sand abrasion, and thermal cycling far better than traditional PET-laminated flexible panels. The SF200 connects via standard MC4 connectors, making it compatible with the ALLPOWERS R600, R1500, R2500, R3500, R4000, S2000, and S2000 PRO, as well as any third-party portable power station or solar charge controller that accepts MC4 input within the SF200's voltage and current parameters (32V Vmp, 6.25A Imp). For stations that use proprietary solar inputs, an MC4 adapter cable is the only accessory needed.
The operating temperature range of -20°C to 85°C (-4°F to 185°F) makes the SF200 suitable from winter basecamp setups through full desert summer exposure — a wider operating window than most competing flexible panels. When installed flat, it withstands up to 50kg of pressure resistance, meaning it handles snow load, foot traffic during RV roof maintenance, and the general physical abuse of mobile installations. The maximum system voltage of 120V supports series wiring of multiple SF200 panels for higher-voltage arrays when paired with compatible charge controllers. At under 10 lbs and just over 54 inches long by 30.7 inches wide, the SF200 is ALLPOWERS' answer to the question every RV and marine solar installer eventually asks: how do I get meaningful wattage onto a curved surface without the weight penalty, the permanent drilling, or the aesthetic compromise of bulky rigid panel mounts? Backed by ALLPOWERS' track record in solar product development since 2010, the SF200 is built for the long-term installation — the panel you mount once and collect energy from for years.
Features
- High Conversion Efficiency: 22%-25% Monocrystalline Silicon + ETFE
- Ultra-Thin & Flexible: 3mm Thick, Bends Into a "U" Shape
- IP68 Waterproof: Highest Rating for Marine, RV & Outdoor Installations
- Lightweight: Just 4.1KG (9.03 lbs) — No Structural Stress on Curved Surfaces
- Compatible With Most Solar Generators & Charge Controllers via MC4 Connectors
| Weight | 4.1KG / 9.03lbs |
|---|---|
| Height (L) | 1375±2mm / 54.13inch |
| Width (W) | 780±2mm / 30.7inch |
| Thickness (H) | 3±0.5mm / 0.11inch |
| Maximum Output (Ppm) | 200W ±5% |
| Open Voltage (Vor) | 38.4V ±5% |
| Short Circuit Current (Ise) | 6.87A ±5% |
| Maximum Output Voltage (Vm) | 32V ±5% |
| Maximum Output Current (Im) | 6.25A ±5% |
| Maximum System Voltage (Vm) | 120V |
| Cell Material | Monocrystalline silicon+ETFE |
| Maximum Conversion Rate (EFF) | 22%-25% |
| Operating Environment Temperature (TEMP) | -20°C ~ 85°C (-4°F ~ 185°F) |
| Pressure Resistance | When installed flat, can withstand up to 50KG |
| Distortion Angle | Can bend into a "U" shape |
| Water Resistant | IP68 |